Honeywell Android 13 must be configured to not allow backup of [all applications, configuration data] to locally connected systems.

Data on mobile devices is protected by numerous mechanisms, including user authentication, access control, and cryptography. When the data is backed up to an external system (either locally connected or cloud based), many if not all of these mechanisms are no longer present. This leaves the backed-up data vulnerable to attack. Disabling backup to external systems mitigates this risk.

SFR ID: FMT_SMF_EXT.1.1 #40

Review managed Honeywell Android 13 device configuration settings to determine if the capability to back up to a locally connected system has been disabled.

This validation procedure is performed on both the EMM Administration Console and the managed Honeywell Android 13 device.

On the EMM console:

COBO and COPE:

1. Open "Device owner management". 2. Verify that "Enable backup service" is toggled to "OFF".

On the managed Honeywell Android 13 device:

COBO:

1. Go to Settings >> System >> Backup. 2. Verify that Backup settings is "Not available".

COPE:

1. Go to Settings >> System >> Backup. 2. Select "Work". 3. Verify that Backup settings is "Not available".

If the EMM console device policy is not set to disable the capability to back up to a locally connected system, or on the managed Honeywell Android 13 device, the device policy is not set to disable the capability to back up to a locally connected system, and this is a finding.

Configure the Honeywell Android 13 device to disable backup to locally connected systems.

On the EMM console:

COBO and COPE:

1. Open "Device owner management". 2. Toggle "Enable backup service" to "OFF".