Rule version TOSS-04-020160 · STIG v2 · 2026-08-20
Allowing devices and users to connect to the system without first authenticating them allows untrusted access and can lead to a compromise or attack.
Wireless technologies include, for example, microwave, packet radio (UHF/VHF), 802.11x, and Bluetooth. Wireless networks use authentication protocols (e.g., EAP/TLS, PEAP), which provide credential protection and mutual authentication.
This requirement applies to those operating systems that control wireless devices.
Satisfies: SRG-OS-000299-GPOS-00117, SRG-OS-000300-GPOS-00118, SRG-OS-000481-GPOS-00481
Verify there are no wireless interfaces configured on the system with the following command:
Note: This requirement is Not Applicable for systems that do not have physical wireless network radios.
$ sudo nmcli device status DEVICE TYPE STATE CONNECTION virbr0 bridge connected virbr0 wlp7s0 wifi connected wifiSSID enp6s0 ethernet disconnected -- p2p-dev-wlp7s0 wifi-p2p disconnected -- lo loopback unmanaged -- virbr0-nic tun unmanaged --
If a wireless interface is configured and has not been documented and approved by the Information System Security Officer (ISSO), this is a finding.
Configure the system to disable all wireless network interfaces with the following command:
$ sudo nmcli radio all off