Rule version SLEM-05-253030 · STIG v1 · 2026-08-20
ICMP redirect messages are used by routers to inform hosts that a more direct route exists for a particular destination. These messages contain information from the system's route table, possibly revealing portions of the network topology.
Verify SLEM 5 does not allow interfaces to perform IPv4 ICMP redirects with the following command:
> sudo sysctl net.ipv4.conf.all.send_redirects
net.ipv4.conf.all.send_redirects = 0If the network parameter "ipv4.conf.all.send_redirects" is not equal to "0", or nothing is returned, this is a finding.
Configure SLEM 5 to not allow interfaces to perform IPv4 ICMP redirects by running the following command as an administrator:
> sudo sysctl -w net.ipv4.conf.all.send_redirects=0
If "0" is not the system's default value, add or update the following line in "/etc/sysctl.d/99-stig.conf":
> sudo sh -c 'echo "net.ipv4.conf.all.send_redirects=0" >> /etc/sysctl.d/99-stig.conf'
> sudo sysctl --system